chore(i18n,docs): update translations (#43969)

docs/i18n/chinese/how-to-work-on-practice-projects.md

@@ -10,7 +10,7 @@ If you want to create new steps, the following tools simplify that process.
 
 ## create-next-step
 
-A one-off script that will automatically add the next step based on the last step numbered as `part-xxx.md` where `xxx` represents the 3-digit step number of the last step. The challenge seed code will use the previous step's challenge seed code with the editable region markers (ERMs) removed.
+A one-off script that will automatically add the next step based on the last step numbered as `step-xxx.md` where `xxx` represents the 3-digit step number of the last step. The challenge seed code will use the previous step's challenge seed code with the editable region markers (ERMs) removed.
 
 **Note:** This script also runs [reorder-steps](#reorder-steps).
 
@@ -75,40 +75,40 @@ A one-off script that automatically reorders the step files in a project's markd
 Let's say you start with the following project structure:
 
 ```bash
-part-1.md
-part-2.md
-part-3.md
-part-4.md
-part-5.md
-part-6.md
+step-001.md
+step-002.md
+step-003.md
+step-004.md
+step-005.md
+step-006.md
 ```
 
-At some point you decide you need to delete `part-2.md`, because that step is no longer needed. Also, you decide to break down `part-4.md` into three steps instead of just one.
+At some point you decide you need to delete `step-002.md`, because that step is no longer needed. Also, you decide to break down `step-004.md` into three steps instead of just one.
 
-To accomplish this restructure, you would need to delete `part-2.md` and then add a `part-4a.md` and a `part-4b.md`. The new folder structure would look like the following:
+To accomplish this restructure, you would need to delete `step-002.md` and then add a `step-004a.md` and a `step-004b.md`. The new folder structure would look like the following:
 
 ```bash
-part-001.md
-part-003.md
-part-004.md
-part-004a.md
-part-004b.md
-part-005.md
-part-006.md
+step-001.md
+step-003.md
+step-004.md
+step-004a.md
+step-004b.md
+step-005.md
+step-006.md
 ```
 
-You now need the file names to be `part-1.md` through `part-7.md`, because you removed one but gained two more for a net difference of one file. Also, the frontmatter of each file below a deleted step or added step will need to be modified by making the `title` key value match the new step number. For example, after renaming `part-3.md` to `part-2.md`, you would need to change `part-2.md`'s title from `Part 03` to `Part 02`.
+You now need the file names to be `step-001.md` through `step-007.md`, because you removed one but gained two more for a net difference of one file. Also, the frontmatter of each file below a deleted step or added step will need to be modified by making the `title` key value match the new step number. For example, after renaming `step-3.md` to `step-2.md`, you would need to change `step-2.md`'s title from `Step 03` to `Step 02`.
 
 See below for the actual project folder changes needed:
 
 ```bash
-part-001.md
-part-003.md renamed to part-002.md and title changes to "Part 2"
-part-004.md renames to part-003.md and title changes to "Part 3"
-part-004a.md renames to part-004.md and title changes to "Part 4"
-part-004b.md renames to part-005.md and title changes to "Part 5"
-part-005.md renames to part-006.md and title changes to "Part 6"
-part-006.md renames to part-007.md and title changes to "Part 7"
+step-001.md
+step-003.md renamed to step-002.md and title changes to "Step 2"
+step-004.md renames to step-003.md and title changes to "Step 3"
+step-004a.md renames to step-004.md and title changes to "Step 4"
+step-004b.md renames to step-005.md and title changes to "Step 5"
+step-005.md renames to step-006.md and title changes to "Step 6"
+step-006.md renames to step-007.md and title changes to "Step 7"
 ```
 
 Along with the above changes, the `challengeOrder` key in the project's `meta.json` file needs to reflect the new step order. This is needed because each step below a step deletion and/or step addition changes the `title` associated with each of the affected step's challenge `id`.

docs/i18n/espanol/how-to-work-on-practice-projects.md

@@ -10,7 +10,7 @@ If you want to create new steps, the following tools simplify that process.
 
 ## create-next-step
 
-A one-off script that will automatically add the next step based on the last step numbered as `part-xxx.md` where `xxx` represents the 3-digit step number of the last step. The challenge seed code will use the previous step's challenge seed code with the editable region markers (ERMs) removed.
+A one-off script that will automatically add the next step based on the last step numbered as `step-xxx.md` where `xxx` represents the 3-digit step number of the last step. The challenge seed code will use the previous step's challenge seed code with the editable region markers (ERMs) removed.
 
 **Note:** This script also runs [reorder-steps](#reorder-steps).
 
@@ -75,40 +75,40 @@ A one-off script that automatically reorders the step files in a project's markd
 Let's say you start with the following project structure:
 
 ```bash
-part-1.md
-part-2.md
-part-3.md
-part-4.md
-part-5.md
-part-6.md
+step-001.md
+step-002.md
+step-003.md
+step-004.md
+step-005.md
+step-006.md
 ```
 
-At some point you decide you need to delete `part-2.md`, because that step is no longer needed. Also, you decide to break down `part-4.md` into three steps instead of just one.
+At some point you decide you need to delete `step-002.md`, because that step is no longer needed. Also, you decide to break down `step-004.md` into three steps instead of just one.
 
-To accomplish this restructure, you would need to delete `part-2.md` and then add a `part-4a.md` and a `part-4b.md`. The new folder structure would look like the following:
+To accomplish this restructure, you would need to delete `step-002.md` and then add a `step-004a.md` and a `step-004b.md`. The new folder structure would look like the following:
 
 ```bash
-part-001.md
-part-003.md
-part-004.md
-part-004a.md
-part-004b.md
-part-005.md
-part-006.md
+step-001.md
+step-003.md
+step-004.md
+step-004a.md
+step-004b.md
+step-005.md
+step-006.md
 ```
 
-You now need the file names to be `part-1.md` through `part-7.md`, because you removed one but gained two more for a net difference of one file. Also, the frontmatter of each file below a deleted step or added step will need to be modified by making the `title` key value match the new step number. For example, after renaming `part-3.md` to `part-2.md`, you would need to change `part-2.md`'s title from `Part 03` to `Part 02`.
+You now need the file names to be `step-001.md` through `step-007.md`, because you removed one but gained two more for a net difference of one file. Also, the frontmatter of each file below a deleted step or added step will need to be modified by making the `title` key value match the new step number. For example, after renaming `step-3.md` to `step-2.md`, you would need to change `step-2.md`'s title from `Step 03` to `Step 02`.
 
 See below for the actual project folder changes needed:
 
 ```bash
-part-001.md
-part-003.md renamed to part-002.md and title changes to "Part 2"
-part-004.md renames to part-003.md and title changes to "Part 3"
-part-004a.md renames to part-004.md and title changes to "Part 4"
-part-004b.md renames to part-005.md and title changes to "Part 5"
-part-005.md renames to part-006.md and title changes to "Part 6"
-part-006.md renames to part-007.md and title changes to "Part 7"
+step-001.md
+step-003.md renamed to step-002.md and title changes to "Step 2"
+step-004.md renames to step-003.md and title changes to "Step 3"
+step-004a.md renames to step-004.md and title changes to "Step 4"
+step-004b.md renames to step-005.md and title changes to "Step 5"
+step-005.md renames to step-006.md and title changes to "Step 6"
+step-006.md renames to step-007.md and title changes to "Step 7"
 ```
 
 Along with the above changes, the `challengeOrder` key in the project's `meta.json` file needs to reflect the new step order. This is needed because each step below a step deletion and/or step addition changes the `title` associated with each of the affected step's challenge `id`.

docs/i18n/italian/how-to-work-on-practice-projects.md

@@ -10,7 +10,7 @@ Se vuoi creare nuovi passi, i seguenti strumenti semplificano quel processo.
 
 ## create-next-step
 
-Uno script eseguito una sola volta che aggiungerà automaticamente il prossimo passo basandosi sull'ultimo numerato come `part-xxx.md`, dove `xxx` rappresenta il numero a 3 cifre dell'ultimo passo. Il codice seed della sfida userà il codice seed di quella precedente, rimuovendo i marcatori delle regioni editabili (MRE).
+A one-off script that will automatically add the next step based on the last step numbered as `step-xxx.md` where `xxx` represents the 3-digit step number of the last step. Il codice seed della sfida userà il codice seed di quella precedente, rimuovendo i marcatori delle regioni editabili (MRE).
 
 **Nota:** Questo script esegue anche [reorder-steps](#reorder-steps).
 
@@ -75,40 +75,40 @@ Uno script eseguito una sola volta che riordina automaticamente i file dei passi
 Diciamo che inizi con la seguente struttura:
 
 ```bash
-part-1.md
-part-2.md
-part-3.md
-part-4.md
-part-5.md
-part-6.md
+step-001.md
+step-002.md
+step-003.md
+step-004.md
+step-005.md
+step-006.md
 ```
 
-A un certo punto decidi che hai bisogno di eliminare  `part-2.md`, perché quel passo non è più necessario. Inoltre, decidi di dividere `part-4.md` in tre passi invece di uno.
+At some point you decide you need to delete `step-002.md`, because that step is no longer needed. Also, you decide to break down `step-004.md` into three steps instead of just one.
 
-Per ottenere questa ristrutturazione, avresti bisogno di eliminare  `part-2.md` e poi aggiungere un `part-4a.md` e un `part-4b.md`. La nuova struttura della cartella assomiglierà alla seguente:
+To accomplish this restructure, you would need to delete `step-002.md` and then add a `step-004a.md` and a `step-004b.md`. La nuova struttura della cartella assomiglierà alla seguente:
 
 ```bash
-part-001.md
-part-003.md
-part-004.md
-part-004a.md
-part-004b.md
-part-005.md
-part-006.md
+step-001.md
+step-003.md
+step-004.md
+step-004a.md
+step-004b.md
+step-005.md
+step-006.md
 ```
 
-Adesso serve che i nomi dei file vadano da `part-1.md` a `part-7.md`, poiché ne hai rimosso uno ma ne hai aggiunti due, con una differenza netta di un file. Inoltre, la presentazione di ogni file sotto un passo rimosso o aggiunto dovrà essere modificata rendendo il valore della chiave `title` uguale al nuovo numero del passo. Ad esempio, dopo aver rinominato `part-3.md` in `part-2.md`, dovrai cambiare il titolo di `part-2.md` da `Part 03` a `Part 02`.
+You now need the file names to be `step-001.md` through `step-007.md`, because you removed one but gained two more for a net difference of one file. Inoltre, la presentazione di ogni file sotto un passo rimosso o aggiunto dovrà essere modificata rendendo il valore della chiave `title` uguale al nuovo numero del passo. For example, after renaming `step-3.md` to `step-2.md`, you would need to change `step-2.md`'s title from `Step 03` to `Step 02`.
 
 Vedi qui sotto per gli effettivi cambiamenti necessari alla cartella del progetto:
 
 ```bash
-part-001.md
-part-003.md rinominato in part-002.md e titolo cambiato in "Part 2"
-part-004.md rinominato in part-003.md e titolo cambiato in "Part 3"
-part-004a.md rinominato in part-004.md e titolo cambiato in "Part 4"
-part-004b.md rinominato in part-005.md e titolo cambiato in "Part 5"
-part-005.md rinominato in part-006.md e titolo cambiato in "Part 6"
-part-006.md rinominato in part-007.md e titolo cambiato in "Part 7"
+step-001.md
+step-003.md renamed to step-002.md and title changes to "Step 2"
+step-004.md renames to step-003.md and title changes to "Step 3"
+step-004a.md renames to step-004.md and title changes to "Step 4"
+step-004b.md renames to step-005.md and title changes to "Step 5"
+step-005.md renames to step-006.md and title changes to "Step 6"
+step-006.md renames to step-007.md and title changes to "Step 7"
 ```
 
 Insieme ai cambi qui sopra, la chiave `challengeOrder` nel file `meta.json` del progetto deve riflettere il nuovo ordine dei passi. Questo è necessario perché ogni passo sotto la cancellazione e/o l'aggiunta di un passo cambia il `title` associato ad ognuno degli `id` delle sfide ai passi interessati.

docs/i18n/japanese/how-to-work-on-practice-projects.md

@@ -10,7 +10,7 @@ If you want to create new steps, the following tools simplify that process.
 
 ## create-next-step
 
-A one-off script that will automatically add the next step based on the last step numbered as `part-xxx.md` where `xxx` represents the 3-digit step number of the last step. The challenge seed code will use the previous step's challenge seed code with the editable region markers (ERMs) removed.
+A one-off script that will automatically add the next step based on the last step numbered as `step-xxx.md` where `xxx` represents the 3-digit step number of the last step. The challenge seed code will use the previous step's challenge seed code with the editable region markers (ERMs) removed.
 
 **Note:** This script also runs [reorder-steps](#reorder-steps).
 
@@ -75,40 +75,40 @@ A one-off script that automatically reorders the step files in a project's markd
 Let's say you start with the following project structure:
 
 ```bash
-part-1.md
-part-2.md
-part-3.md
-part-4.md
-part-5.md
-part-6.md
+step-001.md
+step-002.md
+step-003.md
+step-004.md
+step-005.md
+step-006.md
 ```
 
-At some point you decide you need to delete `part-2.md`, because that step is no longer needed. Also, you decide to break down `part-4.md` into three steps instead of just one.
+At some point you decide you need to delete `step-002.md`, because that step is no longer needed. Also, you decide to break down `step-004.md` into three steps instead of just one.
 
-To accomplish this restructure, you would need to delete `part-2.md` and then add a `part-4a.md` and a `part-4b.md`. The new folder structure would look like the following:
+To accomplish this restructure, you would need to delete `step-002.md` and then add a `step-004a.md` and a `step-004b.md`. The new folder structure would look like the following:
 
 ```bash
-part-001.md
-part-003.md
-part-004.md
-part-004a.md
-part-004b.md
-part-005.md
-part-006.md
+step-001.md
+step-003.md
+step-004.md
+step-004a.md
+step-004b.md
+step-005.md
+step-006.md
 ```
 
-You now need the file names to be `part-1.md` through `part-7.md`, because you removed one but gained two more for a net difference of one file. Also, the frontmatter of each file below a deleted step or added step will need to be modified by making the `title` key value match the new step number. For example, after renaming `part-3.md` to `part-2.md`, you would need to change `part-2.md`'s title from `Part 03` to `Part 02`.
+You now need the file names to be `step-001.md` through `step-007.md`, because you removed one but gained two more for a net difference of one file. Also, the frontmatter of each file below a deleted step or added step will need to be modified by making the `title` key value match the new step number. For example, after renaming `step-3.md` to `step-2.md`, you would need to change `step-2.md`'s title from `Step 03` to `Step 02`.
 
 See below for the actual project folder changes needed:
 
 ```bash
-part-001.md
-part-003.md renamed to part-002.md and title changes to "Part 2"
-part-004.md renames to part-003.md and title changes to "Part 3"
-part-004a.md renames to part-004.md and title changes to "Part 4"
-part-004b.md renames to part-005.md and title changes to "Part 5"
-part-005.md renames to part-006.md and title changes to "Part 6"
-part-006.md renames to part-007.md and title changes to "Part 7"
+step-001.md
+step-003.md renamed to step-002.md and title changes to "Step 2"
+step-004.md renames to step-003.md and title changes to "Step 3"
+step-004a.md renames to step-004.md and title changes to "Step 4"
+step-004b.md renames to step-005.md and title changes to "Step 5"
+step-005.md renames to step-006.md and title changes to "Step 6"
+step-006.md renames to step-007.md and title changes to "Step 7"
 ```
 
 Along with the above changes, the `challengeOrder` key in the project's `meta.json` file needs to reflect the new step order. This is needed because each step below a step deletion and/or step addition changes the `title` associated with each of the affected step's challenge `id`.

docs/i18n/portuguese/how-to-work-on-practice-projects.md

@@ -10,7 +10,7 @@ Se você quer criar novos passos, as ferramentas a seguir vão simplificar o pro
 
 ## create-next-step (criar próximo passo)
 
-Um script único que automaticamente adiciona um novo passo baseado no último passo numerado como `part-xxx.md` onde `xxx` representa o número de 3 dígitos do último passo. O código inicial de desafio usará o código inicial de desafio da etapa anterior com os marcadores de região editáveis ​​(ERMs) removidos.
+A one-off script that will automatically add the next step based on the last step numbered as `step-xxx.md` where `xxx` represents the 3-digit step number of the last step. O código inicial de desafio usará o código inicial de desafio da etapa anterior com os marcadores de região editáveis ​​(ERMs) removidos.
 
 **Observação:** esse script também executa  [reorder-steps](#reorder-steps).
 
@@ -75,40 +75,40 @@ Um script único que automaticamente reordena os aquivos de passos em arquivos m
 Digamos que você começa com a estrutura de projeto a seguir:
 
 ```bash
-part-1.md
-part-2.md
-part-3.md
-part-4.md
-part-5.md
-part-6.md
+step-001.md
+step-002.md
+step-003.md
+step-004.md
+step-005.md
+step-006.md
 ```
 
-Em algum momento, você decide que precisa deletar `part-2.md`, porque os passos nele não são mais necessários. Você também decide que vai diluir as partes dentro de `part-4.md` em três passos ao invés de um.
+At some point you decide you need to delete `step-002.md`, because that step is no longer needed. Also, you decide to break down `step-004.md` into three steps instead of just one.
 
-Para completar essa reestruturação, você precisará excluir a `part-2.md` e então adicionar a `part-4a.md` e a `part-4b.md`. A nova estrutura da pasta deve ficar assim:
+To accomplish this restructure, you would need to delete `step-002.md` and then add a `step-004a.md` and a `step-004b.md`. A nova estrutura da pasta deve ficar assim:
 
 ```bash
-part-001.md
-part-003.md
-part-004.md
-part-004a.md
-part-004b.md
-part-005.md
-part-006.md
+step-001.md
+step-003.md
+step-004.md
+step-004a.md
+step-004b.md
+step-005.md
+step-006.md
 ```
 
-Você precisa agora que os nomes dos arquivos sejam `part-1.md` a `part-7.md`, porque você removeu um, mas ganhou dois arquivos novos, assim gerando somente um arquivo novo. Além disso, o frontmatter de cada arquivo abaixo de um passo adicionado ou excluído precisará ser modificado, onde o valor chave do `title` tem que ser igual ao novo número do passo. Por exemplo, depois de renomeaer `part-3.md` para `part-2.md`, você precisará alterar o título do `part-2.md` de `Part 03` para `Part 02`.
+You now need the file names to be `step-001.md` through `step-007.md`, because you removed one but gained two more for a net difference of one file. Além disso, o frontmatter de cada arquivo abaixo de um passo adicionado ou excluído precisará ser modificado, onde o valor chave do `title` tem que ser igual ao novo número do passo. For example, after renaming `step-3.md` to `step-2.md`, you would need to change `step-2.md`'s title from `Step 03` to `Step 02`.
 
 Veja abaixo as mudanças necessárias na pasta do projeto:
 
 ```bash
-part-001.md
-part-003.md renamed to part-002.md and title changes to "Part 2"
-part-004.md renames to part-003.md and title changes to "Part 3"
-part-004a.md renames to part-004.md and title changes to "Part 4"
-part-004b.md renames to part-005.md and title changes to "Part 5"
-part-005.md renames to part-006.md and title changes to "Part 6"
-part-006.md renames to part-007.md and title changes to "Part 7"
+step-001.md
+step-003.md renamed to step-002.md and title changes to "Step 2"
+step-004.md renames to step-003.md and title changes to "Step 3"
+step-004a.md renames to step-004.md and title changes to "Step 4"
+step-004b.md renames to step-005.md and title changes to "Step 5"
+step-005.md renames to step-006.md and title changes to "Step 6"
+step-006.md renames to step-007.md and title changes to "Step 7"
 ```
 
 Junto com as mudanças acima, a chave `challengeOrder` no arquivo `meta.json` do projeto precisará refletir a nova ordem dos passos. Isso é necessário porque cada etapa abaixo de uma exclusão de etapa e/ou adição de etapa altera o `title` associado a cada um dos `id` do desafio da etapa afetada.